Gauge widget
-
- VIP Livecode Opensource Backer
- Posts: 3581
- Joined: Mon Jan 22, 2007 7:36 am
- Location: Berkeley, CA, US
- Contact:
Re: Gauge widget
Note that the uninstall feature was broken, and just got fixed now in LC9-dp7.
I haven't tried the latest LC8 yet, so I don't know if the fix got migrated there.
I've found it's best to do the uninstall process manually.
I haven't tried the latest LC8 yet, so I don't know if the fix got migrated there.
I've found it's best to do the uninstall process manually.
PowerDebug http://powerdebug.ahsoftware.net
PowerTools http://www.ahsoftware.net/PowerTools/PowerTools.irev
PowerTools http://www.ahsoftware.net/PowerTools/PowerTools.irev
-
- Posts: 722
- Joined: Thu Sep 11, 2014 1:49 pm
- Location: The Netherlands
Re: Gauge widget
Found the files in the following folder with 'free commander'.
C:\Users\Paul.Super-PC\AppData\Local\RunRev\Documentation Cache\8_1_4_commercial
C:\Program Files (x86)\RunRev\LiveCode Community 6.7 (dp 5)\Plugins\extensions
(See printscreen below blue lines)
This is strange because I am working with Indy Livecode 8.1.4.
I do however have older and community versions installed but this should not mean that a widget should be placed within a non active Livecode version!!!
Any idea's!
C:\Users\Paul.Super-PC\AppData\Local\RunRev\Documentation Cache\8_1_4_commercial
C:\Program Files (x86)\RunRev\LiveCode Community 6.7 (dp 5)\Plugins\extensions
(See printscreen below blue lines)
This is strange because I am working with Indy Livecode 8.1.4.
I do however have older and community versions installed but this should not mean that a widget should be placed within a non active Livecode version!!!
Any idea's!
-
- VIP Livecode Opensource Backer
- Posts: 3581
- Joined: Mon Jan 22, 2007 7:36 am
- Location: Berkeley, CA, US
- Contact:
Re: Gauge widget
Open the IDE, look in the Edit menu at Preferences.
Select Files & Memory.
The User Extensions field will be the folder where your extensions are stored.
Within that folder you will find a folder named "Extensions".
If the field is blank then the IDE will be using the default folder. I forget where that is, but IIRC it's named "My LiveCode", so try searching for that.
...and the setting is irrespective of the LC version, so whether you're using 8.1.3 or 8.1.4 or 42.1.0 the IDE will find its extensions in the same place.
Select Files & Memory.
The User Extensions field will be the folder where your extensions are stored.
Within that folder you will find a folder named "Extensions".
If the field is blank then the IDE will be using the default folder. I forget where that is, but IIRC it's named "My LiveCode", so try searching for that.
...and the setting is irrespective of the LC version, so whether you're using 8.1.3 or 8.1.4 or 42.1.0 the IDE will find its extensions in the same place.
PowerDebug http://powerdebug.ahsoftware.net
PowerTools http://www.ahsoftware.net/PowerTools/PowerTools.irev
PowerTools http://www.ahsoftware.net/PowerTools/PowerTools.irev
-
- Posts: 722
- Joined: Thu Sep 11, 2014 1:49 pm
- Location: The Netherlands
Re: Gauge widget
Thanks.. this clarifies everything.
All is well now...
Regards,
Paul
All is well now...
Regards,
Paul
-
- VIP Livecode Opensource Backer
- Posts: 190
- Joined: Sat Apr 08, 2006 7:55 am
- Location: Lübbecke, Germany
- Contact:
Re: Gauge widget
Was anyone able to use the widget successfully with LC 8.1.5RC1 or LC9DP7 with colorwidth of the widget set to "wide"?
When i sett the colorwidth to "wide" the widget does not display any color between the segment lines and not on the segment lines. Switching back to "smal"l shows a color again on he segment lines.
Matthias
When i sett the colorwidth to "wide" the widget does not display any color between the segment lines and not on the segment lines. Switching back to "smal"l shows a color again on he segment lines.
Matthias
-
- VIP Livecode Opensource Backer
- Posts: 4027
- Joined: Sun Jan 07, 2007 9:12 pm
- Location: Bochum, Germany
Re: Gauge widget
I am away from my computer till mid next week.
I will look into this then
I tried shortly with 815 RC1. There was something funny when settind to wide from the properties inspector which i did not investgate but suddenly it worked
Kind regards
Bernd
I will look into this then
I tried shortly with 815 RC1. There was something funny when settind to wide from the properties inspector which i did not investgate but suddenly it worked
Kind regards
Bernd
-
- VIP Livecode Opensource Backer
- Posts: 4027
- Joined: Sun Jan 07, 2007 9:12 pm
- Location: Bochum, Germany
Re: Gauge widget
Hello,
I think I found the reason why the gauge widget does not work in "wide" modus in LC 8.1.5 RC1/2 and LC9 DP7
http://quality.livecode.com/show_bug.cgi?id=19948
I hope the Livecode team can fix this for the final release of 8.1.5
Kind regards
Bernd
I think I found the reason why the gauge widget does not work in "wide" modus in LC 8.1.5 RC1/2 and LC9 DP7
http://quality.livecode.com/show_bug.cgi?id=19948
I hope the Livecode team can fix this for the final release of 8.1.5
Kind regards
Bernd
-
- VIP Livecode Opensource Backer
- Posts: 4027
- Joined: Sun Jan 07, 2007 9:12 pm
- Location: Bochum, Germany
Re: Gauge widget
The Gauge Widget will be working again in 8.1.5 final
It is just the DP versions of 8.1.5 and LC 9 DP7 that the gauge widget will not work in "wide" modus of colorWidth.
http://quality.livecode.com/show_bug.cgi?id=19948
Kind regards
Bernd
It is just the DP versions of 8.1.5 and LC 9 DP7 that the gauge widget will not work in "wide" modus of colorWidth.
http://quality.livecode.com/show_bug.cgi?id=19948
Kind regards
Bernd
Re: Gauge widget
@bn: I fixed that bug this morning - it will go into the next build of 8.1.5 (probably rc 3). Apologies for this - it was my fault - I misread a PR which was to fix a problem with the oval paint tool... It fixed that problem, but only because the oval paint tool code was *not* dividing its diameter by 2 to get radii!.
Re: Gauge widget
Hi, @bn
I got this error when saving the standalone app for android.
" could not descend into a referenced asset folder "
Anyone help to fix it.
best regards
Jose Montero
I got this error when saving the standalone app for android.
" could not descend into a referenced asset folder "
Anyone help to fix it.
best regards
Jose Montero
-
- VIP Livecode Opensource Backer
- Posts: 4027
- Joined: Sun Jan 07, 2007 9:12 pm
- Location: Bochum, Germany
Re: Gauge widget
Hi Kai,
sorry I don't do android standalone. Not of any help here.
Though the path seems a bit funny.
Kind regards
Bernd
sorry I don't do android standalone. Not of any help here.
Though the path seems a bit funny.
Kind regards
Bernd
Re: Gauge widget
Thanks @bn, for your quick response.
I´ll try to do it myself , using oval graph !
best regards
Jose Montero
I´ll try to do it myself , using oval graph !
best regards
Jose Montero
-
- VIP Livecode Opensource Backer
- Posts: 4027
- Joined: Sun Jan 07, 2007 9:12 pm
- Location: Bochum, Germany
Re: Gauge widget
Hi Jose,
I would try to get the widget to work in your Android-app. I don't think your error when building a standalone has to do with the gauge widget. It is a building error. Do other widgets work in this setting?
Kind regards
Bernd
edit: HTML refers to the fact that I had built a HTML5 app from this stack, no HTML in the stack itself
it is a bit tricky to do this using graphics. I did it before I did the widget. I post the graphics version here for you to use/change/study.
I would try to get the widget to work in your Android-app. I don't think your error when building a standalone has to do with the gauge widget. It is a building error. Do other widgets work in this setting?
Kind regards
Bernd
edit: HTML refers to the fact that I had built a HTML5 app from this stack, no HTML in the stack itself
Re: Gauge widget
Hi, bn
Thanks by your answer, I´ll spend some days making with graph Oval its really a bit tricky.
Do other widgets work in this setting? Yes it does
Best regards.
PD: I attach a img of my gauge
Thanks by your answer, I´ll spend some days making with graph Oval its really a bit tricky.
Do other widgets work in this setting? Yes it does
Best regards.
PD: I attach a img of my gauge